The company specializes in the supply of Elisa kits, quality assurance, price concessions, can provide free testing services, please contact us.
This kit can only be used for scientific research, not for medical diagnosis.
Canine tumor necrosis factor alpha (TNF-α) quantitative detection kit (ELISA)
user's Guide
[Canine tumor necrosis factor alpha (TNF-α) Elisa kit kit name]
Canine tumor necrosis factor alpha (TNF-α) quantitative detection kit (ELISA)
[Canine tumor necrosis factor alpha (TNF-α) Elisa kit kit uses]
Quantitative detection of tumor necrosis factor alpha (TNF-α) in dog serum, plasma and related liquid samples.
[The detection principle of canine tumor necrosis factor alpha (TNF-α) Elisa kit]
This kit uses double-antibody two-step sandwich enzyme-linked immunosorbent assay (ELISA). Add the standard and the test sample to the pre-coated canine tumor necrosis factor alpha (TNF-α) monoclonal antibody clear enzyme label coated plate, after incubating for a sufficient time, wash to remove unbound components, and then add the enzyme label After incubating the working solution for a sufficient period of time, wash to remove unbound components. Substrates A and B are added in sequence, and the substrate (TMB) is converted into a blue product catalyzed by horseradish peroxidase (HRP), which turns yellow under the action of acid. The concentration of α (TNF-α) was positively correlated. The OD value was measured at a wavelength of 450 nm. Based on the OD value of the standard and the sample, the canine tumor necrosis factor α (TNF-α) content in the sample was calculated.
[Canine tumor necrosis factor alpha (TNF-α) Elisa kit composition]
1
Enzyme coated plate
12 holes × 8
7
Developer A liquid
6mL
2
Standard
0.3mL × 6 tubes
8
Developer B liquid
6mL
3
20 times concentrated washing liquid
25mL
9
Stop solution
6mL
4
Sample diluent
6mL
10
Instructions
1 serving
5
Special diluent
6mL
11
Sealing film
2 sheets
6
Enzyme reagent
6mL
12
sealed bag
1
Remarks: The concentration of standard products (No. 1 → No. 6) is: 80, 40, 20, 10, 5, 2.5ng / L.
[Canine Tumor Necrosis Factor Alpha (TNF-α) Elisa kit required but not provided reagents and equipment]
1. 37 ℃ thermostat
2. Standard specification microplate reader
3. Precision pipettes and disposable tips
4. Distilled water
5. Disposable test tubes
6. Absorbent paper
[Operation steps of canine tumor necrosis factor alpha (TNF-α) Elisa kit]
1. Preparation: Remove the reagent kit from the refrigerator and re-equilibrate at room temperature for 30 minutes.
2. Mixing solution: dilute the 20-fold concentrated washing solution with distilled water to the original one.
3. Add standard products and samples to be tested: take a sufficient number of enzyme-coated plates and fix them to the frame. Set up standard wells, sample wells to be tested and blank control wells, record the positions of each well in the standard wells. Add 50μL of standard product; first add 10μL of sample to be tested, and then add 40μL of sample diluent (that is, the sample is diluted 5 times); blank control well is not added.
4. Incubation: Incubate in a 37 ° C water bath or thermostat for 30 minutes.
5. Wash the plate: discard the liquid, pat dry on the absorbent paper, fill each hole with the washing solution, let stand for 1min, shake off the washing solution, pat dry on the absorbent paper, repeat the washing 4 times (you can also use the washing machine to press Instructions for washing the board).
6. Add enzyme-labeled working solution: add 50μL of enzyme-labeled working solution to each well, without adding blank control wells.
7. Incubation: Incubate in a 37 ° C water bath or thermostat for 30 minutes.
8. Wash the plate: discard the liquid, pat dry on the absorbent paper, fill each hole with washing liquid, let stand for 1min, shake off the washing liquid, pat dry on the absorbent paper, repeat the plate washing 4 times (you can also use the washing machine to press Instructions for washing the board).
9. Color development: add 50μL of developer A solution to each well, and then add 50μL of developer B solution, mix for 30s with a plate mixer (or gently shake for 30s by hand), and avoid color development at 37 ℃ for 15min .
10. Termination: Remove the enzyme labeling plate and add 50μL of stop solution to each well to stop the reaction (the color changes from blue to yellow).
11. Determination: Zero the blank holes, and within 15 minutes after termination, measure the absorbance (OD value) of each well with a wavelength of 450 nm.
12. Calculation: According to the concentration of the standard product and the corresponding OD value, calculate the linear regression equation of the standard curve, and then calculate the corresponding sample concentration on the regression equation according to the OD value of the sample. You can also use various application software to Calculation. The final concentration is the actual measured concentration times the dilution factor.
[Canine tumor necrosis factor alpha (TNF-α) Elisa kit sample requirements]
1. The sample cannot contain sodium azide (NaN3) because sodium azide (NaN3) is an inhibitor of horseradish peroxidase (HRP).
2. The specimen should be extracted as soon as possible after collection. The extraction should be carried out according to relevant literature. The experiment should be carried out as soon as possible after extraction. If the test cannot be performed immediately, the specimen can be stored at -20 ℃, but repeated freezing and thawing should be avoided.
3. The sample should be fully centrifuged, without hemolysis and particles.
[Cautions for Canine Tumor Necrosis Factor Alpha (TNF-α) Elisa Kit]
1. The experiment is carried out in strict accordance with the instructions, and the result of the experiment must be determined by the reading of the microplate reader.
2. If the enzyme-labeled coated board is not used up after opening, it should be put into a sealed bag and added with desiccant immediately.
3. It is recommended that all standards, samples and blank controls be tested in duplicate, and the average value is taken to reduce the experimental error.
4. Keep in mind that the sample has been diluted 5 times. The calculation result is multiplied by 5 to obtain the actual concentration of the sample.
5. The quantitative range of this kit is 2.5-80ng / L. If it exceeds this range, it is calculated from the extension of the standard curve. ), Multiplied by the total dilution factor is the final concentration of the sample.
6. If the color is too light, the substrate incubation time can be extended properly.
7. In order to avoid cross-contamination, the tips, samples and blank controls should be replaced with a new one for each addition; the common components such as enzyme working solution, sample diluent and substrate should be cantilevered, and they should not touch the microwells. ; Do not reuse the sealing film.
8. The kits are used within the warranty period, and different batches of reagents should not be mixed.
9. Substrate B is sensitive to light and avoid prolonged exposure to light.
[Canine tumor necrosis factor alpha (TNF-α) Elisa kit operating procedures summary]
Prepare reagents, samples and standards
Add prepared samples and standards, and react at 37 ℃ for 30 minutes
Wash the plate 4 times, add the enzyme reagent, and react at 37 ℃ for 30 minutes
Wash the plate 4 times, add color developing solutions A and B, and develop at 37 ℃ for 15 minutes
Add stop solution
Read OD value within 15 minutes
Calculation
[Canine tumor necrosis factor alpha (TNF-α) Elisa kit detection range]
2.5ng / L-80ng / L
[Canine tumor necrosis factor alpha (TNF-α) Elisa kit specifications]
96T / box
[Canine tumor necrosis factor alpha (TNF-α) Elisa kit storage]
Store at 2-8 ℃, protected from light and moisture.
[Canine tumor necrosis factor alpha (TNF-α) Elisa kit validity]
6 months
Hotel chairs refer to seats used in hotel rooms, lobbies, restaurants, conference rooms, and other places. According to different functions and design styles, hotel chairs can be divided into multiple categories. Below, we will classify and introduce materials and design styles.
1. Material classification:
(1) Wooden chairs: Wooden chairs are one of the most common hotel chairs, commonly used wood including oak, beech, elm, etc. Wooden chairs have a natural and warm texture, making them suitable for use in high-end hotel rooms and lobbies.
(2) Metal chairs: Metal chairs are generally made of metal materials such as iron and aluminum, which are sturdy, durable, and stylish. They are suitable for use in hotel restaurants and meeting rooms.
(3) Plastic chairs: Plastic chairs are usually made of materials such as polypropylene, which are lightweight and easy to clean, making them suitable for use in budget hotels and outdoor spaces.
(4) Fabric chair: Fabric chairs are generally made of fabric or leather materials, with a comfortable texture, suitable for use in high-end hotel rooms and leisure areas.
2. Design style classification:
(1) Modern style: Modern style hotel chairs are designed with simple and smooth lines, emphasizing functionality and comfort. Commonly used materials include metal, plastic, and leather.
(2) Classical style: The design of hotel chairs in classical style emphasizes details and decoration, with commonly used materials such as wood and fabric, giving a sense of elegance and luxury.
Summary: Hotel chairs are classified based on material and design style, and different classifications are applicable to different places and needs. In the interior design of hotels, selecting appropriate hotel chairs can enhance guests' comfort and experience, while also coordinating with the overall design style to create a unique hotel atmosphere.
Wedding Chair,Throne Chair,Church Chair,Nordic Chair
Foshan Shengshi Zhihui Technology Co., Ltd. , https://www.szhfurniture.com