[ Chinese wardrobe network ] With the continuous improvement of people's living standards, people who are constantly pursuing a comfortable life also require further improvement in their home life, so custom wardrobes are increasingly popular with modern families. While demanding health and environmental protection, the design also requires fresh, beautiful and extravagant. Buying wardrobes not only affects people's quality of life, but also is an important factor in home safety and comfort. Therefore, the installation of various wardrobe panels and wardrobe parts of the wardrobe has become a learning, and although the wardrobe backboard is not exposed to people, the purchase of the wardrobe backboard has become a knowledge of installing the wardrobe. Now let us discuss The secret after purchasing the wardrobe back panel.
Under normal circumstances, the closet is placed in the home space, which is standing against the wall, so the largest contact area with the wall is actually the wardrobe back. Looking at the current custom wardrobe products, the cabinets are usually made up of five whole boards, which are a single board directly nailed to the two side panels.
Every year, the “Nanfengtian†in the south is the “mouldy seasonâ€. Every household is “wet drenched†everywhere. If the indoor wardrobe does not have a backboard, clothes and bedding stored in the closet will be moldy and smelly. In the case, using a compression bag to protect against moisture can result in large capital expenditures.
The thickness of the purchase of the back panel of the wardrobe has little effect on the wardrobe. The back panel is generally not load-bearing, and is mainly dust-proof, moisture-proof and stable. The back panel generally has 5MM, 9MM, and 18MM concentrated specifications, while the Schneider custom wardrobe currently uses 9mm and 18mm thickness. These three thickness wardrobe back panels have their own advantages:
First, 5MM thickness of the wardrobe back panel
Gap: 5mm wardrobe back panel gap can be left a lot, but the thickness is too thin, no matter the slot in the wardrobe back panel, or the overall stability of the product, the 5mm back panel can not make the wardrobe performance better. Play.
Moisture-proof: 5MM wardrobe backboard in moisture resistance, although the moisture will not be directly immersed, but there are still many consumers worried that if the rainy season is severe, there is concern about the performance of the sheet, so many consumers would rather add a little more money. Also, change the 5mm to a 9mm wardrobe back panel, so you can feel at ease.
Stable: 5MM stability, if it is a large wardrobe, long between 1-2 meters, for stability, the back plate is less stressed, the deformation may be less. If the length of the wardrobe is large, the backboard will be subjected to excessive force, which is relatively easy to deform, and it is also easy to break the back panel of the wardrobe.
Second, 9MM thickness of the wardrobe back panel
Gap: 9mm wardrobe back plate gap treatment, this thickness is most suitable for the back plate slotting, and the gap with the wall plays a very good role, the back plate does not take up too much space, which is also beneficial for the back plate and the wall to stay The gap is made to make the moisture resistance better.
Moisture-proof: 9MM wardrobe backboard, in the space saved, you can apply anti-moisture paint on the back, and also do moisture-proof work on the wall, so that the backboard is extremely strong, and the gap is properly reserved, and the middle can also be added. The upper layer of moisture-proof cotton, such a wardrobe, is perfect.
Stable: 9mm wardrobe backboard is enough to support the top cabinet and each layer to give pressure, not only the stability can be guaranteed, but also more space to come out, so that the wardrobe will not protrude, the use area will be smaller, and so on. In the longer wardrobe, the role can be played more and the whole wardrobe becomes extremely strong.
Third, 18MM thickness of the wardrobe back panel
Gap: The thickness of the 18MM wardrobe back panel is more limited than that of the 5MM and 9MM in the purchase wardrobe, because the 18MM wardrobe back panel takes up a lot of space, which will lead to the original space occupying or convex appearance, such as using other moisture-proof techniques. For example, the backboard plate brush moisture-proof paint, plus moisture-proof cotton, the wall is brushed with moisture-proof paint, etc., although the space occupancy will be reduced a little, but it will also occupy the overall volume of the wardrobe, resulting in a reduction in the practical depth of the wardrobe.
Moisture-proof: moisture-proof performance, 18MM wardrobe backboard is no different from other thicknesses, it will not be stronger because of the thicker moisture resistance, after all, the moisture is only water mist or water droplets, not the direct tapping of the faucet.
Steady: The 18MM wardrobe back panel is the strongest. Even if the weight is added to the top, the wardrobe back panel will not be deformed, and the links between the hardware components are relatively stable. This also makes the whole wardrobe more stable and thick. Make people feel more secure.
In short, the purchase of the wardrobe backboard in terms of moisture resistance, stability, economic benefits, 9MM can achieve perfect results, such a wardrobe back panel thickness, what is the opinion?
Electric lifting TV bracket,After the TV is hung on it, it can be controlled by the remote control.Let the TV automatic lifting in addition to bring visual enjoyment, the benefits are quite a lot. When you don't watch TV, you can completely hide it, reduce the occupation of space, and avoid dust falling into it. It's more convenient and practical for families who don't watch TV often.
Tv Lift System,Tv Mount,Tv Lift Cabinet Systems,Tv Lift System Motorized,Remote Control Motorized Tv Mount
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.upliftecdesk.com