Waxing has a good protective effect on the wooden door, which can prevent moisture from intruding into the solid wood door and dust, and can also increase the smoothness of the wooden door. However, if the waxing method is improper, it will cause whitening, ring marks, and discoloration. Therefore, when cleaning the wooden door, be sure to pay attention to the following items.

Learn the wooden door waxing six steps, keep the wooden door beautiful

1, choose sunny weather waxing

If the humidity is too high in rainy days, waxing will cause white turbidity. When the room temperature is below 5 degrees, the wooden door wax will become hard. Do not use a chemical-containing rag to wipe the wooden door before waxing, as this will result in poor adhesion of the wooden door.

Wooden door waxing

2, remove the garbage, dirt on the surface of the wooden door

Use a vacuum cleaner to remove dirt and dust from the surface of the wooden door. Wipe the stain on the wooden door with a diluted neutral detergent. Wipes that are difficult to remove can be wiped with water. To prevent the detergent from accumulating in the grooves, the rag soaked with detergent should be wrung out as much as possible. The wood door wax remover can cause stains and bulging of the wooden door and must not be used.

3. Wipe with a wrung rag

Wipe with a wrung rag. The surface of the wooden door, especially the grooved part, should be carefully wiped and no detergent remains. If the detergent and moisture are left behind, it will cause whitening and swelling.

Wooden door waxing

4, fully dry

The moisture on the surface of the wooden door and the groove is completely dried to be waxed at the rear. Depending on the season, the time required varies, but it takes about half a day. If it is not fully dried, the wooden door wax will not adhere to the surface of the wooden door, affecting the appearance and causing whitening.

5, waxing method

Shake the container with the wooden door wax and mix well. Before the whole wooden door of the room is waxed, it is necessary to perform a partial trial in a corner, such as a corner, to confirm the impermanence. In order to prevent the wooden door wax from polluting the wall skirting and furniture, cover the above parts with tape paper. Use a clean rag to fully dip the wooden door wax, so it is better to not drip.

Wooden door waxing

Do not pour the wooden door wax directly onto the wooden door, otherwise it will produce traces and creases. Carefully apply according to the direction of the wood grain of the wooden door, do not leak or thick and uneven. If the amount of application is too small, unevenness will result, and too much application will result in poor film formation. Keeping it thin and even is the key to waxing. Do not dilute the wooden door wax with water. The waxing tool can be used with a special mop for waxing, which is easy to operate and has an ideal effect.

6, drying time control

Before drying the wooden door wax, do not touch the wooden door to dry. It usually takes 20 minutes to 1 hour. If there is a leak, apply it. If it is used twice, the second time, after the first complete drying. Once every 6 months, you can keep the wooden door for a long time.

Wooden door waxing

Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }

High Ratio Sealant Gun

Professional dual component cartridge gun from Concentric with 26:1 high thrust ratio, perfect for applying 2-part materials such as epoxy and injection foam, and compatible with 200 ml dual cartridges in 1:1 and 2:1 configurations. Engineered for smooth and precise material delivery, the caulk gun is easy to use and produces great results.

Heavy Duty Caulk Gun

The dual cartridge gun comes ready to use with 200 ml 1:1 dual cartridge. Or you can easily convertible it with included hardware to use with 200 ml 2:1 dual cartridge. Made with heavy duty metal barrel, handle, rod and plate and treated with premium finish, the caulk gun has the durability to satisfy even the most demanding professionals. Includes hardware for converting cartridge capacity. Compatible with dual cartridge adhesives with 200 ml capacity.

High Ratio Sealant Gun,High Thrust Ratio Caulk Gun,Heavy Duty Cartridge Gun,Heavy Duty Glue Gun

jiangsu concentric internatinal ltd , https://www.concentric-corp.com