Analysis of the principle of Glass Foot Filie
1. Materials Glass File For Feet
The glass foot grinder is mainly composed of a grinding disk, a grinding head, a grinding disk shaft, a motor and other parts. The commonly used materials of the grinding disc are glass, reinforced glass, etc., and the grinding head is mostly made of tungsten steel and other materials.
2. Structure of Glass Heel File
The grinding disc is the core part of the glass foot grinder, which is generally round, and the smoothness and smoothness of the surface of the grinding disc are extremely high to meet the needs of the grinding foot. The grinding disc shaft is the part that connects the motor and the grinding disc, and can be rotated to measure the speed of the grinding disc to ensure good grinding effect.
3. Use of Crystal Glass Foot File
The glass foot grinder is a power tool specially used to remove dead skin and horny feet. When using, you need to press the switch, gently press the grinding disc on the part of the foot, and slowly exfoliate the skin. It should be noted that the foot grinder can not smear the foot grinder or oil, otherwise it will reduce the service life of the disk.
4. Maintenance
After use, the grinding disc and grinding head should be cleaned in time, otherwise the accumulated cutin will affect the use effect. Rinse with warm water or wipe with a towel. In addition, in order to maintain the smoothness of the grinding disc, a layer of polishing liquid can be applied regularly.
In short, the principle of the glass foot grinder is a tool that grinds off the dead skin and cuticle of the foot through the rotation of the electric drive disk. When using, it is necessary to pay attention not to apply liquid items, regularly clean the grinding disc and grinding head during maintenance, and apply the bright liquid of the disc to ensure the service life and effect.
Glass Foot File,Glass File For Feet,Glass Heel File,Crystal Glass Foot File
SZ CHENGYANG BEAUTY TOOLS CO.,LTD , https://www.cyfootfile.com