Fashion rough eyebrows building steps

Fashion rough eyebrow creation steps:

The first step: trim the eyebrows neatly

Repair the four principles of eyebrows

Principle 1: Keep moving

Try not to try to adjust the upper edge of the eyebrows. The upper edge is very risky to adjust as a "baseline". It is safer to start from the lower edge.

Principle 2: Before moving

Brows and eyebrows are also used as a "baseline" for motionlessness, but some people's eyebrows and triangles are too obvious. They do not meet the straight eyebrows of this season, and the sharp corners can be repaired.

Principle 3: Eyebrow width 7~8 mm

Adjust the width of the eyebrows from the lower edge of the eyebrows. The slightly colored control is 8 mm, and the pure black eyebrow is controlled at 7 mm. It is an ideal width. Keep the lower edge as parallel as possible to the upper edge.

Principle 4: Brow length slightly over the end of the eye

Adjust the length of the eyebrows from the end of the eyebrows and extend naturally within the range of the eyebrows. You can use the fingertips to feel the starting point of the brow bone range. Generally, it is pulled to the end of the eye or 3 mm beyond the end of the eye.

Use eyebrow brush to comb eyebrow streamline

1. Use the eyebrow brush to comb the eyebrow streamline. It is combed laterally from the brow and can be neatly arranged along a fixed direction.

Cut off the hair

2. Cut off the hair. Use the eyebrow knives to trim the hairs outside the outline, and the hair between the left and right eyebrows should also be repaired.

Cut long eyebrows

3, the longitudinal length of a single eyebrow will be old-fashioned, put the flat comb on the eyebrows, and cut the long eyebrows.

Step 2: Determine the length, width and height of the eyebrows with eyebrow styling products

Repeatedly rubbing the base with a lighter eyebrow powder

1. Repeat the application of the lighter eyebrow powder on the eyebrows to fill the base. Fill the basic shape of the eyebrows. If the eyebrows are too thin, use this layer to make the eyebrows expand a little.

Brushing from the brow to the eyebrows

2, from the eyebrows along the growth direction of the eyebrows to the eyebrows, the brush is taken vertically and moved longitudinally, the brush surface and the skin are vertical, the eyebrow color will be more natural and even. Also, choose a soft brush that matches the thickness of the eyebrows so that the powder is even.

Apply a layer of fixing glue to the eyebrows with a dyeing eyebrow brush

3, use the eyebrow brush to brush the eyebrow brush a layer of shaping glue, can be colorless, you can also choose the color of the eyebrow dye.

The third step: fill the gap and increase the concentration of eyebrows

Fill the missing part of the shape just defined

1. Rub the eyebrow powder on the front end of the brush and brush the powder along the growth direction of the eyebrow to fill the missing part of the shape justified. The middle part can be slightly deeper than the edge of the outer frame.

The part from the eyebrow to the end of the eyebrow can be flat

2, the part from the eyebrow to the end of the eyebrow can be flat, or it can sag naturally. After painting, remember to pull the mirror farther to confirm that the length and sag of the left and right eyebrows are symmetrical.

Make shadows to make eyebrows three-dimensional

3, create a shadow to make the eyebrows three-dimensional, pay attention to the natural finish and the sense of darkness from the brow to the eyebrow. The use of a spiral brush not only allows the eyebrows to be combed neatly, but also adjusts the color uniformity.