Applicable materials: water electroplating, vacuum plating surface, part of metal materials, some processing PP material
Physical characteristics: Over-net performance: 77T~140T
Drying time: natural evaporation 10~30 minutes
Actual dry time: spontaneous volatilization for 24 hours
Forced drying time: 70°C~80°C, 20~30 minutes
Thinner: Silk-screening oil-water S-7, spray-opening oil S-550, S-366.
Spray viscosity: 8-10 seconds (coating 4 cups)
Coating area: 20~30 square meters/kg
Color matching system: Only use this series of inks to mix with each other, do not mix with other types of ink;
Usage: (1) Must be used with hardener DD-06.
(2) The proportion of hardener is 10%, and the time for using the hardener is 2-3 hours:
(3) Part of the vacuum plating surface, part of the processing PP material, can be used directly without using hardener, can be achieved
(4) Stir well before use and cover it at any time after use;
(5) If necessary, add 10-20% of diluent
(6) baking is better than self-drying
Precautions:
(1) Due to the wide variety of electroplating materials and the different requirements for coating properties, please print and confirm the quality requirements before printing.
(2) Do a good job of removing grease from the surface of the printed material to promote adhesion;
(3) After the product coating is completely dry, it can be stacked and shipped;
(4) The performance test should be conducted after it is completely dry;
(5) Keep the working environment air circulation:
(6) Sprayed and printed items must not be stored in contact with soft PVC to prevent the plasticizer in PVC from attacking the ink layer causing stickiness and discoloration.
Hazardous Substances: Dangerous Substances Type 4 Second Oils
Safekeeping: (1) To protect the skin and eyes, wear protective gloves and goggles. If the skin is accidentally stained with ink, wash it thoroughly with soap. If you accidentally get in your eyes, rinse immediately with plenty of water and see a doctor.
(2) After use, keep the container in a closed, cold and dark place.
(3) Before handling this product, ask the user to deal with the ink on the basis of reference to the MSDS.
Lipstick, a cosmetic that is applied to the lips to make them red and bright, is a cosmetic that is mainly used on the lips and can increase the color of the lips or change the color of the lips. It is one of the important makeup.
First of all, before applying lip balm, you must wash your lips, and then apply a layer of lip balm or anti-crack ointment to protect your lips and prevent cracks, so as to better make up. Shade your lips with foundation or masking cream.
Next, use a lip liner to outline the ideal line, with the lips naturally relaxed, so that you can better observe the shape of the lip line. Draw in the order of the upper and lower lips, with the upper lip closed and drawn from the center to the sides. The bottom lip is drawn from the sides toward the center. If you don't want to accentuate your lips, you can skip the line. Hold a lipstick or lipstick-stained lip brush between your thumb and forefinger. Press your pinky finger against your chin to hold and support the handle. Trace the lip hill and the center of your lower lip to determine the thickness of your lip.
Then, from the corners of the upper lip to the middle of the lip, and from the corners of the lower lip to the middle of the lip, with the lips slightly open to create a better line. Pay attention to the balance between left and right. After applying the outside, gradually apply to the inside until it is all over. Press lightly on your lips with a face paper to remove excess oil. Press, slightly open the lips, the effect can reach the inside of the lips. Plump up your lips by applying a glossy lipstick or an accent silvery lipstick in the center of your lips.
Lip Stick,Matte Lipstick,Nude Lipstick,Long Lasting Lipstick
DONGGUAN VOLES COMMODITY CO., LTD , https://www.volesvip.com