[ Chinese wardrobe net ] wardrobe as an important piece of furniture in people's daily life, wardrobe deformation has always been a headache for people, Xiaobian for everyone to sort out the reasons for the deformation of the wardrobe door, and tips in our daily maintenance ,Let's take a look at the following.
The reason for the deformation of the wardrobe door:
First, the parts are piled up to cause deformation. In the production, some operators are convenient for the drawing, the plates are stacked randomly, or the plates of the stacked plates are not flat, and the other is to lean the plates against the wall, causing the plates to The piece is deformed by its own weight before entering the next process.
Second, the coating process causes deformation. In the process of painting, due to the improper use of the process and raw materials, the plate is deformed and deformed with the change of the internal stress of the coating.
Third, the effect of finishing putty, in the decoration of the door parts, many manufacturers in order to reduce costs to use pig blood putty or glue to prepare putty, because these two putty contains a lot of water, the commonly used substrate for plate furniture - The medium density fiberboard and the particleboard are particularly hygroscopic. Therefore, when one side of the door panel member is not put with putty and the other side is coated with such a water-rich putty, the door panel member is hygroscopic and deformed.
Fourth, the impact of the drying process In the production of many manufacturers, when the board is coated with putty or paint, it should be placed on the drying rack for natural drying, if the pole of the drying rack is too sparse or uneven, it will also cause The door components are found to be bent and deformed during the drying of the paint.
5. Inappropriate coating treatment, which causes the internal stress of the deformed coating of the panel furniture component. After the coating is cured, a certain coating will be formed. Even if there is no external force, an internal stress will be generated. If the internal stress is not handled properly, It will become one of the main reasons for the bending deformation of the door components.
Causes and treatment methods of wardrobe door deformation
Pay attention to the following aspects in the maintenance of the wardrobe:
1. Avoid using irritating and corrosive chemicals such as alcohol and detergent that are easily damaged by wood.
2. Wooden wardrobe, usually just wipe with a clean rag, but if it is dirty, you can use soap or neutral detergent, wipe it with a damp cloth.
3. Ultraviolet rays are also destructive to wood furniture. Therefore, it is necessary to use cloth or curtains to avoid sun exposure.
4. If you want to wax, it is best to choose a wax with a high concentration and solid content, no silicon, so as not to damage the paint surface.
When cleaning the wooden wardrobe every day, unless there is obvious stain, it is generally necessary to wipe it with a clean rag. For the sake of the reasons of the deformation of the wardrobe door, I believe that after the use of the wardrobe, you can follow the maintenance tips. Take precautions.
Women's Tote Handbags,Golf Stand Bag,Golf Clothing Bag,Custom Golf Bags
Longzhao Technology (Guangdong) Company limited , https://www.princebag.com