[ Chinese wardrobe net ] folding wardrobe has the advantages of small size, light weight and easy to carry. Compared with the traditional large-volume and heavy-quality wardrobe, the folding wardrobe brings convenience to many consumers, and it is cost-effective, especially for small Consumers of the type and consumers who live in high-rise cities are keen on choosing. However, many consumers are also asking: How to install a folding closet? Many consumers have this trouble, do not know how to install folding wardrobes, today, Xiaobian for everyone to organize the installation method of folding wardrobes, I hope to help consumers install folding wardrobes.
Folding wardrobe installation method
When purchasing a folding wardrobe, the consumer pays attention to whether there is a label on the equipment. If there is a label, it is convenient to install the installation label. Consumers can put the number of the equipment together for backup.
Frame installation:
The bottom of the plate sits and the interface is installed. The general interface is divided into aluminum alloy interface and plastic interface. The former is usually made of screws, and the latter can be used directly. After the assembly of the panel is completed, take care to ensure that the diagonal error of the folded wardrobe cabinet is within plus or minus 1MM. The folding wardrobe cabinet must be placed horizontally. After folding the wardrobe cabinet level, it can be installed in order: clothes rail, stacking area, door panel, etc. This step is the simplest, and the consumer can install it in the last step.
Locate the bottom part of the placed assembly and follow the installation instructions for the folding closet. Consumers should be aware that the bottom part must not be mistaken. Mistakes can cause hidden troubles in folding wardrobes. If reinstallation is more likely to cause damage to the interface. If the folding wardrobe has a tripod, the mast part should be installed first. Next, install other tubes of the wardrobe, pay attention to the strength during the installation process. If the strength is too large in the process, the wardrobe will be shaken, and the interface will burst, which requires special attention.
Wardrobe installation:
After the integral frame of the folding wardrobe is installed, the cloth is loaded from top to bottom according to the frame. Nowadays, the design is becoming more and more humanized. Many merchants use Velcro to connect each interface. This design allows consumers to install the folding wardrobe at the end of the installation. Open the zipper of the cloth, and the sticky part in the middle is also pulled open, bottom down. There are small holes dug in the bottom of the cloth. Pull the cloth from top to bottom according to each hole and pull down the vertical tubes. You can not pull to the bottom first.
It should be noted that there are differences between the front and back of the compartment fabric. Do not install it. At the same time, when pulling the cloth, be careful not to let the steel pipe break the cloth.
About the introduction of the folding wardrobe, Xiaobian for everyone to break into here, when you operate, pay attention to the reference manual, according to the actual situation to adapt to the installation. I hope that the small-sized folding wardrobe installation method will help consumers to install the folding wardrobe in the home.
Erasme Luxury High Chair With Wheels
Zhejiang Lamon Technology Inc. , https://www.baby-chair.com