The electric faucet has the advantage of quick hot water outspread, which is deeply loved by the user and facilitates the family to use hot water in winter. So how to install the electric faucet? How to install is safe?
1, install the filter:
The electric faucet must be equipped with a filter at the inlet. Because there is a small amount of debris in the tap water, the faucet should be heated so as not to trap the float magnet or to block the shower. If the filter is clogged, it will reduce the flow. The water becomes smaller, and the floating magnetism does not actuate the electric faucet. After a period of time, remove the electric faucet strainer for cleaning and use it.
2, check the floating magnetic position:
When installing the electric faucet, the installer must remember to check whether the float magnet is at the bottom, so that it is in a free active state to ensure the normal use of the electric faucet. Because the floating magnetic is the hydropower linkage switch, open the water valve to automatically heat, turn off the water to stop heating, if there is debris stuck magnetic float, electric faucet will appear dry or not heating phenomenon, clear the floating magnetic debris, can normal work.
3, without mixing valve:
Electric water taps do not need to use mixing valves, because if the mixing valve is used, cold and hot water will mix and flow out at the same time. In this case, the flow rate of hot water will become smaller, causing the water temperature of the electric faucet to be too high and over temperature. Changes will occur when the water is hot and cold. The staff should inform the customer who uses the mixing valve to switch on the water directly to the hot water side without mixing the cold water, so that the service life of the product will be longer and it will not be easy to foul.
4, control of water flow:
The electric faucet must use the manufacturer's special shower. In normal working conditions, the electric faucet can adjust the water flow or increase the water level to increase the water temperature. The average user does not have the habit of controlling the flow of the faucet, so that the water temperature does not reach the predetermined effect.
In short, the installation requirements of electric faucets are relatively professional, and it is recommended that people should still look for professional production companies to purchase such products, because generally large enterprises will be equipped with professional installation teams to carry out on-site installation services, and the installation quality is also higher than the average The master is more professional, it is recommended that the owners still do not want to be cheap for a moment.
It can be seen that installing electric faucets is not a small project. It is the most important to ensure personal safety in the installation process.
<\p><\div>
Student microscope is designed for tertiary institutions and primary and secondary schools, which convenient to observe biological slices, biological cells, bacteria and living tissue culture, fluid precipitation observation and research. It is widely used in teaching demonstration, biochemical experiments, clinical research ect. All products will have been strictly quality checked in factory before packing.
Lab Microscope,Digital Microscope,Monocular Microscope,Biological Microscope
Xinxiang Vic Science&Education Co.,Ltd. , https://www.hnlaboratoryequipment.com