Because of the value of mahogany furniture, damage is difficult to correct. Once damaged, it will have a huge impact on the value of furniture. The hazards of mahogany furniture are often found during the transfer and transportation of furniture. How to make a good transfer of furniture, to ensure that the transport does not harm the mahogany furniture itself.
First and foremost, the packaging should be robust and robust. The first layer of packaging, must be cleaned before the packaging of the mahogany furniture, and then wrapped with white film, and fixed; the second layer is then wrapped with furniture-specific corrugated paper, the same custom to be fixed; the third layer to be reinforced 2cm thick foam board; next, the wooden box is made outside according to the size of the furniture. The manufacturing scale of the structural wooden box should be consistent with the furniture scale so that the furniture does not shake. It is best to use a nail gun for the time of nailing. For the export of furniture, it is necessary to use a fully enclosed wooden box for export.
Second, the details must be carefully handled. For example, mahogany chairs, can not lift the handrail during the transfer, and must focus on the handrails when packaging; and the handles must be thickened; copper can not be neglected, also need to be packaged and fixed to prevent scratching furniture paint Or appearance. The details above are also to be diligently marked, such as up and down, left and right, front side, glass, and special parts must be written, the sign must be clearly understood. This makes it easy for the transfer workers to master during loading and unloading. Heavy, pressure-resistant furniture placed underneath, light, afraid of pressure on the top.
In the end, special parts and models should be treated specially. For example, if there are some bulges, especially some small ones like the dragon's beard, use filling materials for filling, and then carefully package; insert screens and screens need to be lifted vertically Vertically placed, must not be laid flat, flat and easy to break; there are also squats like the case, but also thicker package maintenance; Arhat bed to open the next wall, separate packaging; the most difficult is the canopy bed and Pulling out the bed, you have to take apart the pieces, and mark them at the time of dismantling to prevent the warehousing. Also, pay attention to the cooperation between the workers and prevent the damage to the furniture.
White Sideboard,Buffet Cabinet,Black Sideboard,Mirrored Sideboard
Foshan Zheng Nengliang Home Furnishing Co., Ltd. , https://www.housecustomax.com