Question 1: When the fly-through is running, the "File contains illegal path" error occurs, and it cannot be saved. The "Save As" command under the file menu does not work.
When someone schedules an edition, he likes to reuse a layout, delete the contents of the previous day, and then delete the contents of the previous day, so that the content is repeatedly edited on a layout, and the frequency and time of use are too long. This can easily lead to an "inclusion of illegal paths." occur. Solution: It is recommended to create a new layout, save the name after each new content. If the above problem has occurred, try copying the contents of the layout to the new layout. If you get an error when opening a file, you can try to move the file to another subdirectory and open it. In addition, if the dongle is connected to a printer, unplug the printer and try again.
Question 2: Print directly to the Wenjie A5000 printer in Feiteng, and the pictures cannot be printed, but other inkjets are acceptable.
If you print directly in Feiteng, you must set "Include Picture Data" in the Environment Settings, otherwise the picture cannot be output. If it is the first row to generate the PS file, and then use the Wenjie printer to print it. If “Include Picture Data†is not selected, the “Collect Picture Data to†option will be removed when publishing, and check if the picture path is correct during printing. When outputting, the system will search the images in the layout according to the information contained in the PS file. The search order is: the full path of the original image recorded in the PS file; the path where the PS file is located; the path specified during the installation of the fly-through. And additional paths. If the corresponding image cannot be found under these paths, a "missing picture" or "fatal error" will be reported. At this time, it is necessary to check if the picture is deleted or removed.
Question 3: Sometimes it takes a long time to publish documents.
A: It can be checked from the following aspects.
(1) The PS file generated by the data will be large, and the interpretation process and distribution time will become longer. Solution: The setting is not included.
(2) If a large number of TrueType fonts are used in the layout, and these fonts have download attributes set, the launch time will be longer, and the use of fewer fonts will shorten the time for publishing.
(3) Sometimes, in order to make the layout beautiful, many patterns will be designed and produced, such as variant characters, text-to-curve, perspective properties, and too many layers, etc., which will extend the distribution time accordingly.
(4) If the pictures on the layout are on other computers in the LAN, when the number of pictures is large or the connection to the network is not good, it may take too long to send due to network problems.
(5) Check whether the machine configuration is too low, such as the memory is too small, the hard disk space for storing temporary files is not enough and so on all have a great impact on the distribution time, the distribution computer should be maintained at PII233, memory 128MB, and the remaining hard disk space is more than 100MB.
Question 4: What is the role of "re-entering the article block" in the fourth edition of Feiteng 3.1?
In the Feiteng 3.1 fourth edition, the "re-populate the article block" item was added under the edit menu. This function is similar to OLE (object connection and embedding). For example, in Feiteng, a text file generated by the operating system's own WordPad is unloaded, and the work of editing and title decoration has been completed. At this time, the text file is modified. The usual practice is to: The file is re-arranged into the layout, re-layout the title, or replace the original file when the text layout. It is now possible to "refresh" the original article by replacing the command with "Reissue article block". If you are importing a .doc document generated by Word, you can also correctly bring text attributes defined in the Word environment, such as fonts, font sizes, etc. into the Feiteng.
Question 5: Precautions for installing and running Feiteng under Windows 2000.
The installation should be performed in a good system environment, preferably under the newly installed Windows 2000, and reinstall all fonts. First install Feiteng and then install other application software. After the installation is complete, double-click the icon to enter the program, you can do some common operations for preliminary inspection. A more accurate method is to use the zone code input method to input “0180†(ie, “○†character) in Feiteng, which is often used in “2002†and so on. If it can be input, it means that the installation was successful under Windows 2000; If not, it means that the installation is not completely successful. Feiteng and Windows 2000 do not cooperate well. In the future, it may cause problems.
Note when using: (1) Do not select “Generate Feitler Preview†in the lower left corner of the dialog box dialog box when saving files or rename files, or it will easily exit automatically; (2) Feiteng under Windows 2000 Ding typeface, or simply delete the Arbor fonts, other fonts, such as Hanyi, have not found some problems, but it should also pay attention to the number of fonts in the Windows\Fonts directory should not be too much, generally should not exceed 250 kinds, or Feiteng is also error-prone (3) Practice has found that it is not advisable to include too many images (over 15MB for TIFF images and 800KB or more for JPEG images) in the same fly-through layout, patterns (variation characters, text-to-curve, edit-view properties, etc.) Too many levels, etc., too many are also prone to crashes or overtime.
Question 6: What is the significance of Feiteng's network save function?
The network save function is added after the second version of Feiteng 3.1. Its purpose is to increase insurance and prevent users from mistaken operations or system failures. As a result, a good layout cannot be opened, or an "inclusion of illegal path" error is reported. . The implementation method is: in the Feiteng File menu under the environment settings to add a "Save fit file at the same time" option, where you can specify another save path, when the user saves the file, it will automatically generate in the specified path The file with the same name as the folder. Each time you save a file, a file is added to the folder. The file name is a numeric serial number. When the original layout file fails to open or reports an "Include illegal path" error, we can rename the file name .bak file to the file name .fit file, or open Autosave.fit. If this is not possible or the .bak file is too old If you do, you can find the corresponding folder in the directory where you saved it, and select the most recent backup file (the one with the highest serial number). It is recommended that this path be located on another partition of a working hard disk or on a networked machine so that even if the partition in which the layout file is saved causes a file loss, it can retrieve the file on another partition or other normal machine.
Question 7: Can the various versions of Feiteng 3.1's dongles be mixed? Where does the dongle drive go?
In general, each version of Feiteng has its own corresponding dongle and cannot be mixed. The author once tried to use other versions of the dongle in Feiteng 3.1 second edition and failed to succeed. As the first, second and third versions of the Feiteng 3.1 dongle were unstable and easily damaged, the fourth edition replaced the dongle. The dongle driver file can be downloaded from the Founder technical service website or directly to the Rainbow dongle website ( ). The fourth version of the encryption dog is RainbowSSD539. When installing Feiteng under Windows 2000 or XP, update the dongle driver in Windows 2000 or XP.
Question 8: Feiteng 3.1 has installed Founder 106 Lanting fonts. When using the “Simple to Start Traditional†command to switch between simplified Chinese characters and traditional Chinese characters, can it be correctly identified in the traditional version of FeiTeng?
After the word conversion in the standard GB coded Chinese character area, the word will not be lost. However, for the convenience of users, more than 300 characters have been added to the Simplified Chinese character library. These characters are not corresponding to the simplified Chinese and Chinese characters, so the missing characters will appear. After converting into traditional Chinese, the Feiteng files cannot be correctly identified in the traditional version. Because the two versions of the Feiteng code are different, the files converted in the Simplified version appear to be traditional characters, but these traditional characters are still GB codes. The traditional version of FeiTeng only supports BIG5 encoding.
Question 9: In the news editing and editing system, why does the picture appear as a large black block on the editing and editing system after the online version of the Feiyue Group?
After completing the save with the online version of the Feiteng Group, it was viewed in the sample management system of news gathering and editing system and found that the picture was a large black block. If the "hardware acceleration" of the graphics card is lowered, the picture is displayed as a flower (ie, a vertical bar or the like). Reasons: (1) It may be related to the difference between the display settings of the computer monitor and the display settings of the group computer. The two should be consistent, otherwise there will be problems on the display; (2) Confirm the version of the Feitui interface program on the network is July. After the 9th, if it should not be updated; (3) try not to use Trident's graphics card, the graphics card color should be true color (24-bit color), if you can not meet this requirement you need to replace the video card; (4) try to put the picture Change the format to BMP and try again.
Question 10: After installing the editing and editing interface in the news editing and editing system, the auto-save item in the Feiteng Chinese menu disappears.
The automatic save function in Feiteng is very practical, which can prevent loss due to power down or crash. But after installing the editing and editing interface, the automatic save item disappears under the file picking list, even at FIT. Adding Autosave to the INI file is also useless. This is because after the editing and editing interface is established, the automatic save file is changed to another subdirectory (FIT/chbtmp). In addition, setting the auto save can directly modify the CHB.INI file. (Xing Feng, Leping Newspaper, Jiangxi Province) ("Printing Technology")
When someone schedules an edition, he likes to reuse a layout, delete the contents of the previous day, and then delete the contents of the previous day, so that the content is repeatedly edited on a layout, and the frequency and time of use are too long. This can easily lead to an "inclusion of illegal paths." occur. Solution: It is recommended to create a new layout, save the name after each new content. If the above problem has occurred, try copying the contents of the layout to the new layout. If you get an error when opening a file, you can try to move the file to another subdirectory and open it. In addition, if the dongle is connected to a printer, unplug the printer and try again.
Question 2: Print directly to the Wenjie A5000 printer in Feiteng, and the pictures cannot be printed, but other inkjets are acceptable.
If you print directly in Feiteng, you must set "Include Picture Data" in the Environment Settings, otherwise the picture cannot be output. If it is the first row to generate the PS file, and then use the Wenjie printer to print it. If “Include Picture Data†is not selected, the “Collect Picture Data to†option will be removed when publishing, and check if the picture path is correct during printing. When outputting, the system will search the images in the layout according to the information contained in the PS file. The search order is: the full path of the original image recorded in the PS file; the path where the PS file is located; the path specified during the installation of the fly-through. And additional paths. If the corresponding image cannot be found under these paths, a "missing picture" or "fatal error" will be reported. At this time, it is necessary to check if the picture is deleted or removed.
Question 3: Sometimes it takes a long time to publish documents.
A: It can be checked from the following aspects.
(1) The PS file generated by the data will be large, and the interpretation process and distribution time will become longer. Solution: The setting is not included.
(2) If a large number of TrueType fonts are used in the layout, and these fonts have download attributes set, the launch time will be longer, and the use of fewer fonts will shorten the time for publishing.
(3) Sometimes, in order to make the layout beautiful, many patterns will be designed and produced, such as variant characters, text-to-curve, perspective properties, and too many layers, etc., which will extend the distribution time accordingly.
(4) If the pictures on the layout are on other computers in the LAN, when the number of pictures is large or the connection to the network is not good, it may take too long to send due to network problems.
(5) Check whether the machine configuration is too low, such as the memory is too small, the hard disk space for storing temporary files is not enough and so on all have a great impact on the distribution time, the distribution computer should be maintained at PII233, memory 128MB, and the remaining hard disk space is more than 100MB.
Question 4: What is the role of "re-entering the article block" in the fourth edition of Feiteng 3.1?
In the Feiteng 3.1 fourth edition, the "re-populate the article block" item was added under the edit menu. This function is similar to OLE (object connection and embedding). For example, in Feiteng, a text file generated by the operating system's own WordPad is unloaded, and the work of editing and title decoration has been completed. At this time, the text file is modified. The usual practice is to: The file is re-arranged into the layout, re-layout the title, or replace the original file when the text layout. It is now possible to "refresh" the original article by replacing the command with "Reissue article block". If you are importing a .doc document generated by Word, you can also correctly bring text attributes defined in the Word environment, such as fonts, font sizes, etc. into the Feiteng.
Question 5: Precautions for installing and running Feiteng under Windows 2000.
The installation should be performed in a good system environment, preferably under the newly installed Windows 2000, and reinstall all fonts. First install Feiteng and then install other application software. After the installation is complete, double-click the icon to enter the program, you can do some common operations for preliminary inspection. A more accurate method is to use the zone code input method to input “0180†(ie, “○†character) in Feiteng, which is often used in “2002†and so on. If it can be input, it means that the installation was successful under Windows 2000; If not, it means that the installation is not completely successful. Feiteng and Windows 2000 do not cooperate well. In the future, it may cause problems.
Note when using: (1) Do not select “Generate Feitler Preview†in the lower left corner of the dialog box dialog box when saving files or rename files, or it will easily exit automatically; (2) Feiteng under Windows 2000 Ding typeface, or simply delete the Arbor fonts, other fonts, such as Hanyi, have not found some problems, but it should also pay attention to the number of fonts in the Windows\Fonts directory should not be too much, generally should not exceed 250 kinds, or Feiteng is also error-prone (3) Practice has found that it is not advisable to include too many images (over 15MB for TIFF images and 800KB or more for JPEG images) in the same fly-through layout, patterns (variation characters, text-to-curve, edit-view properties, etc.) Too many levels, etc., too many are also prone to crashes or overtime.
Question 6: What is the significance of Feiteng's network save function?
The network save function is added after the second version of Feiteng 3.1. Its purpose is to increase insurance and prevent users from mistaken operations or system failures. As a result, a good layout cannot be opened, or an "inclusion of illegal path" error is reported. . The implementation method is: in the Feiteng File menu under the environment settings to add a "Save fit file at the same time" option, where you can specify another save path, when the user saves the file, it will automatically generate in the specified path The file with the same name as the folder. Each time you save a file, a file is added to the folder. The file name is a numeric serial number. When the original layout file fails to open or reports an "Include illegal path" error, we can rename the file name .bak file to the file name .fit file, or open Autosave.fit. If this is not possible or the .bak file is too old If you do, you can find the corresponding folder in the directory where you saved it, and select the most recent backup file (the one with the highest serial number). It is recommended that this path be located on another partition of a working hard disk or on a networked machine so that even if the partition in which the layout file is saved causes a file loss, it can retrieve the file on another partition or other normal machine.
Question 7: Can the various versions of Feiteng 3.1's dongles be mixed? Where does the dongle drive go?
In general, each version of Feiteng has its own corresponding dongle and cannot be mixed. The author once tried to use other versions of the dongle in Feiteng 3.1 second edition and failed to succeed. As the first, second and third versions of the Feiteng 3.1 dongle were unstable and easily damaged, the fourth edition replaced the dongle. The dongle driver file can be downloaded from the Founder technical service website or directly to the Rainbow dongle website ( ). The fourth version of the encryption dog is RainbowSSD539. When installing Feiteng under Windows 2000 or XP, update the dongle driver in Windows 2000 or XP.
Question 8: Feiteng 3.1 has installed Founder 106 Lanting fonts. When using the “Simple to Start Traditional†command to switch between simplified Chinese characters and traditional Chinese characters, can it be correctly identified in the traditional version of FeiTeng?
After the word conversion in the standard GB coded Chinese character area, the word will not be lost. However, for the convenience of users, more than 300 characters have been added to the Simplified Chinese character library. These characters are not corresponding to the simplified Chinese and Chinese characters, so the missing characters will appear. After converting into traditional Chinese, the Feiteng files cannot be correctly identified in the traditional version. Because the two versions of the Feiteng code are different, the files converted in the Simplified version appear to be traditional characters, but these traditional characters are still GB codes. The traditional version of FeiTeng only supports BIG5 encoding.
Question 9: In the news editing and editing system, why does the picture appear as a large black block on the editing and editing system after the online version of the Feiyue Group?
After completing the save with the online version of the Feiteng Group, it was viewed in the sample management system of news gathering and editing system and found that the picture was a large black block. If the "hardware acceleration" of the graphics card is lowered, the picture is displayed as a flower (ie, a vertical bar or the like). Reasons: (1) It may be related to the difference between the display settings of the computer monitor and the display settings of the group computer. The two should be consistent, otherwise there will be problems on the display; (2) Confirm the version of the Feitui interface program on the network is July. After the 9th, if it should not be updated; (3) try not to use Trident's graphics card, the graphics card color should be true color (24-bit color), if you can not meet this requirement you need to replace the video card; (4) try to put the picture Change the format to BMP and try again.
Question 10: After installing the editing and editing interface in the news editing and editing system, the auto-save item in the Feiteng Chinese menu disappears.
The automatic save function in Feiteng is very practical, which can prevent loss due to power down or crash. But after installing the editing and editing interface, the automatic save item disappears under the file picking list, even at FIT. Adding Autosave to the INI file is also useless. This is because after the editing and editing interface is established, the automatic save file is changed to another subdirectory (FIT/chbtmp). In addition, setting the auto save can directly modify the CHB.INI file. (Xing Feng, Leping Newspaper, Jiangxi Province) ("Printing Technology")
Trolley Handle,Trolley Bag Handle,Telescopic Trolley Bag Handle,Trolley Handle For Tooling Case
GUANGDONG SUNDES LUGGAGE ACCESSORY TECHNOLOGIES CO.,LTD , https://www.sundes-global.com