Ryobi Demonstrates Digital Solutions

From January 30th to February 1st, Ryobi Co., Ltd. and Vertex Digital Image Co., Ltd. jointly launched a digital solution under the name of “Digital Print Shop” in London. In the show, Ryobi 3304HA offset printing machine and Vertex's DPX CTP system and DPX 5080 organically combine to establish a communication bridge between the traditional offset printing press and all-digital solutions. Ryobi 3304HA is a fully automatic press produced on the basis of the 3304H four-color offset press. This kind of equipment can use polyester or aluminum base plate, and install a semi-automatic plate changer and diagonal diagonal adjustment clamp, which simplifies the adjustment of overprinting and shortens the preparation time of multi-color printing, especially suitable for short-run printing. Frequent changeovers. In addition, this device is also equipped with a continuous dampening system, ink remote control and ink key preset system, PCS printing color control system and image area data calculation software (IVS), thus ensuring the best print quality. Ryobi 3304HA has a printing speed of 10,000 prints/hour. Compared to digital printing equipment, there are many advantages to using offset printing in the short-run printing field. For a printer, the most important thing is that the investment must pay off. With an offset press, the initial investment is less, and compared with the digital printing system, the residual value of the offset printing press is very stable and relatively high, the scope of the printing material is much wider, and the daily consumption is obviously lower. In the short-run printing market, the cost of a single page is a key factor. The CTP-printer packaging solution provided by Ryobi than Offset Digital Imaging Co., Ltd. enables the printing company to challenge the digital printing system in terms of price and print quality in the short printing field of 200 to 300 printing. And it is better than the latter.