The transportation of mahogany furniture needs to pay attention to those matters

Because of the high value of mahogany furniture, damage is difficult to repair, and once damaged, it will have a huge impact on the value of furniture. The damage of mahogany furniture often occurs during the handling and transportation of furniture. How to do the transportation of furniture and ensure that the transportation does not damage the mahogany furniture. We interviewed a professional who has experienced furniture transportation for more than ten years. He talked from a professional point of view about how furniture should be handled and handled.

First, the packaging should be strong and strong. The first layer of packaging, must be cleaned before the packaging of the mahogany furniture, and then covered with white film, and fixed; the second layer and then wrapped with furniture-specific corrugated paper, also fixed; the third layer to be reinforced 2cm Thick foam board; next, the frame wooden box is made outside according to the size of the furniture. The framed wooden box should be made in the same size as the furniture so that the furniture does not shake. It is best to use a nail gun when nailing. Exported furniture must use a fully enclosed wooden box for export.

Second, the details must be carefully handled. For example, mahogany chairs can not lift the handrails during handling, and must focus on the handrails when packaging; and the handles must be thickened; the copper can not be neglected, and it needs to be packaged and fixed to avoid scratching the furniture paint. Or surface. The details of the above intentions are also to be diligently marked, such as up and down, left and right, front side, with or without glass, any special parts must be written out, the label must be clear. This makes it easy for the porter to grasp during loading and unloading. Heavy, pressure-resistant furniture placed underneath, light, afraid of pressure on the top.

Finally, special parts and models should be treated specially. For example, if there are protruding parts, especially some tiny parts like dragon's beards, they should be filled with filling materials and then carefully packed; the screen and screen type must be lifted vertically. Vertically placed, do not lay flat, flat and easy to break; there are also squat heads like the case, but also thicken the package protection; Arhat bed to disassemble the next subdivision, separate packaging; the most difficult is the canopy bed and stepping Beds, have to be disassembled, and be marked when dismantling, so as not to install badly, but also pay attention to the cooperation between dismantling workers to avoid damage to furniture.

For more information on furniture, please pay attention to the official website of Xianghe Furniture City http://