Energy rate gas stove installation precautions, energy rate gas stove for sale

Gas stoves believe that everyone is still very familiar with the current gas stoves on the market, there are many brands, so know the rate of gas stoves? For the rate of gas stove installation considerations I believe you still want to know, for the rate gas stove after-sales service we are Before you buy a gas stove, you should first check it out. Let's introduce it to you in the following small series!

Energy rate gas stove installation precautions

The first cooker is required to be installed in a well-ventilated cabinet. If there is a cylinder, the minimum distance between the cylinder and the cylinder is 1 meter, but the intake hose should not exceed 2 meters. The flammable items cannot be stacked under and around the cooker. Because the gas stove will produce a certain amount of heat when it is working, if there is flammable material placed below, there may be a fire hazard.

The distance between the back of the second cooker and the wall is not less than 15 cm, and the clearance between the side and the wall is not less than 20 cm. If the wall is a flammable material, an insulating fireproof layer must be added. And the cooker and the lower part are not less than 10 cm, and the upper part of the cooker should be no less than 80 cm. Why is this required? Because gas stoves generate a lot of heat when working, it can be dangerous if you don't have enough space to dissipate heat.

The gap at the junction of the third intake pipe must be sealed. When connecting with a hose, the hose must be in place and clamped with a clamp. Because this is not clamped, there may be air leaks. This is a safety issue. Be sure to pay attention to this problem when using it.

The fourth embedded cooker opens the air intake hole of not less than 15 cm X 15 cm at the appropriate position under the cooktop to supplement the air and install the intake pipe, because the general intake of the embedded cooker is from below. If you open a hole underneath, the air will be replenished enough, the combustion will be sufficient, and the smoke will be less and safer.

The kitchen area where the gas stove is installed should not be less than 2 square meters, the indoor height should not be less than 2.2 meters, and some gas will be generated when the gas is burned. The house space is small and difficult to exclude, and it is prone to personal poisoning; the second kitchen and adjacent space should be good. The isolation prevents the leaking gas from colluding with each other. That is to say, the space between the kitchen and the living room should have a relatively closed space. At least when cooking, you should completely separate it. The first is that there may be some smell in the kitchen. The second is that there may be gas. Leak, so it is best to keep it isolated when using it.

The stainless steel material is strong and wear-resistant, but the gloss of the surface will be worse when used for a long time; the glass material is more beautiful, corrosion-resistant and wear-resistant, relatively slender in use, such as inadvertently encountering cold water after heat There is a possibility of bursting, so it is recommended to buy products of different materials according to your own preferences. It is better to choose stainless steel from a safety point of view; in addition, a new ceramic panel material is more and more popular for consumption. It combines the advantages of stainless steel and glass. The surface of the ceramic cooker is easy to handle, and there is no possibility of bursting like glass. This material is now more and more popular in the market. The price of these three materials should be higher for ceramic panels, and for glass (panels) and stainless steel panels (price).

From the choice of combustion mode, gas cookers are now classified into direct fire and rotary fire according to the burner. The combustion of the rotating fire is not sufficient, the flue gas is easy to exceed the standard, and the direct fire combustion is relatively uniform, and the flue gas is generally not easy to exceed the standard. Among them, the main fire is placed in the patented technology, the main fire is placed in the middle ring, the thermal efficiency is high, energy saving and gas saving, related experiments It is confirmed that the water in the center of the main fire in the direct fire is boiling at the same time as the surrounding water, while the boiling of the traditional gas stove is from the periphery to the middle. In the same case, 5 liters of water is heated, and the traditional gas cooker takes 15 minutes or more. The burning time is too long, and the carbon monoxide emission exceeds the standard; the gas stove in the main fire only takes about 10 minutes, and the boiling time is greatly shortened, which not only saves gas but also greatly reduces carbon monoxide emissions.

Energy rate gas stove after-sales service

The energy rate of the fine-burning series cooker has a unique internal rotation and direct combination flame design. The inner-rotation fire hole rotates in cohesive combustion. The outer straight fire hole has strong flame, the layer is distinct, the heating is even and stable, the heat concentration is not easy to disperse, and the combustion efficiency is greatly improved. The inner and outer combined flames greatly increase the contact area between the flame and the bottom of the pot, and ensure a sufficient contact time. The flame is not easily escaped to the bottom of the pot, thereby effectively improving the heating efficiency. With large-aperture nozzle design, the air supply is smooth and sufficient, providing sufficient kinetic energy for combustion, and the firepower is more rapid and powerful. The gas passage adopts a three-way cross-shaped "cross star" four-channel design, which effectively avoids gas extrusion, makes the gas and air fully mixed, and then strongly ejects, and the flame combustion becomes more stable.

The energy rate cooker creates a different kind of cooking space for the intimate design, and creates a new pattern in the “kitchen thing”. Therefore, choose the energy rate gas stove, try to face everything in the kitchen with a new attitude, where life can be very exciting.

The energy rate series cooker panel is made of high-quality brushed stainless steel (or tempered glass). It is pure and flat, simple and generous, stylish and dazzling, and easy to clean and scrub. Zinc alloy two-color knob, simple design, stylish and dazzling, smooth control, easy to adjust. Seiko cast iron pot holder, high temperature resistance, corrosion resistance, durable; the shape design is simple and generous, highly suitable, and the pot is stable.

The above is the content of the note on the installation of energy gas stoves introduced by Xiaobian today. After reading the introduction of this article, we have some understanding of the precautions for the installation of gas stoves. Xiaobian thinks that the gas stove is good, everyone You can refer to it when you purchase it.