The faucet is one of the indispensable items in our lives. When we choose it, we know the importance of it to us, and we will consider it after installation. So everyone knows what the faucet repair method is? Many people don't know it! Today, Xiaobian will take a look at the faucet repair method and the installation steps of the faucet! I hope you can help you with the faucet being repaired.
Faucet repair method
1. Change the axis of the faucet. First of all, when repairing, be sure to understand the reason why the faucet leaks. If the faucet is worn by the shaft pad, then use the pliers to loosen the gland bolt and then put it back. Take out the shaft gasket inside and replace it with a new one.
2, the water stop tape is damaged, the faucet is tightly tightened or the faucet should be used to remove the faucet counterclockwise. At this time, you can use the tape to roll it clockwise. Once you have finished, then tap the faucet. To re-tighten, be sure to try to see if there is any water leakage.
3, the faucet takes over the water at the junction, remember to remove the cap nut of the faucet during processing, or re-tighten it or consider directly adding a new u-type gasket.
Faucet installation steps
1. Please install the professional installation master. In particular, such faucets, small washers and small accessories are more and more, and must be installed step by step in order to ensure that there are no problems such as water leakage.
2. During installation, it is best not to bump the faucet with hard objects. Do not leave cement, glue and other debris on the surface to avoid damage to the surface coating.
3. If the faucet is installed in the new house and the water pipe network is newly laid, there will be impurities such as sand grains in the water. Before installation, be sure to remove the debris in the pipe. Discharge the water for a long time until the water quality is clear before installing the faucet.
4, can not be used too much force when opening, this will cause damage, gently turn around. Even a traditional faucet can't be screwed to death with great strength. The surface of the faucet should be wiped clean after use. Do not use the faucet handle as a handrail to support or use it.
5. If the water pressure is not lower than 0.02mpa, after using for a period of time, if the water output is reduced, or even the water heater is turned off, the hot and cold water flow should be cut off. Use a wrench to gently unscrew the nozzle screen at the outlet of the tap. Cover, clean the impurities and carefully install them.
There are some problems when we use the faucet for a long time, so it is important to learn how to install it. The above is the faucet repair method introduced by Xiaobian today and the installation steps of the faucet are here. To learn more, please continue to pay attention to the decoration home.
More related wonderful reading:
What are the common faults in taps? Recommended faucet repair method
In the limited space in the kitchen, how to quickly and efficiently complete the processing and preparation of various ingredients, has also become a headache for many people.
Now we have prepared many practical Kitchen Gadgets!
Kitchen Tools And Gadgets,Cutting Board Kitchen,Eco-Friendly Coffee Cup Mat,Fast Thawing Plate,Silicone burger holder
vchomy , https://www.ivchomy.com